Roof Underlayment in Minnesota: What Goes Under Shingles

Published on October 24, 2026

Categories

Ready to Go Solar?

Getting your best quote from Centauri Systems is just one click away.

Roof Underlayment in Minnesota: What Goes Under Shingles

Most homeowners can tell you what color their shingles are. Almost none can tell you what is under them. That hidden layer is called underlayment, and in Minnesota it does more work than the shingles you see from the street.

Here is what roof underlayment is, which types show up in our climate, and where the extra protection of ice and water shield earns its place.

What Underlayment Actually Does

Think of shingles as the raincoat and underlayment as the lining. Shingles shed most of the water. But wind can push rain sideways under a tab, melt water can creep uphill, and a nail hole is a nail hole. Underlayment is the backup layer that keeps that stray water from reaching your decking.

It also gives the crew a protected surface while the job is underway. If the weather turns before the last bundle is on, a dried-in roof is far better off than bare plywood. Our guide to what happens on roof replacement day walks through where this step fits.

The Main Types You Will See

Most proposals fall into three buckets:

  • Asphalt-saturated felt. The traditional option. It is familiar and works, but it can wrinkle when it gets wet and tears more easily during installation.
  • Synthetic underlayment. A woven or coated sheet that is generally stronger, lighter to carry, and more tolerant of sitting exposed for a while. Many crews prefer it for those reasons.
  • Self-adhering (peel-and-stick) membrane. A rubberized, sticky layer that seals around nails. This is what people mean by ice and water shield.
Type Best at Watch out for
Felt Familiar, widely used under shingles Can wrinkle when wet and tears more easily
Synthetic Strength and tolerance for sitting exposed during a job Product quality varies, so ask which one is specified
Self-adhering membrane Sealing around nails and blocking water at vulnerable edges Needs a clean, dry deck and is usually used in targeted areas rather than everywhere


No single type is “the best” everywhere on the roof. Good installations often combine them: a membrane in the high-risk zones and a synthetic or felt layer across the rest.

Where Ice and Water Shield Matters in Minnesota

Minnesota winters create a specific problem. Snow melts on the warm part of the roof, runs down, and refreezes at the cold eave. The ice backs up and pushes water under the shingles. If you have ever had a stain on a ceiling near an exterior wall, you may already know how that story ends. We explain the cause in our post on ice dams in Minnesota.

A self-adhering membrane at the eaves is the layer that stops that backed-up water from reaching your deck. Building codes in cold climates like ours generally call for ice barrier protection at the eaves, so this is not only a nice upgrade. Check current local requirements, and ask your roofer how far up the roof the membrane will run and whether your proposal says so in writing.

Other spots where a membrane is commonly used:

  • Valleys, where two roof planes dump water into one channel.
  • Around chimneys, skylights, and vents, where flashing meets the roof surface.
  • Low-slope sections, where water drains slowly and lingers.
  • Along rakes and ridges in some designs.

What It Does Not Fix

Underlayment is a backup, not a patch for a worn-out roof. If the decking is soft or rotted, no membrane will hold a nail properly. That is why a good crew inspects the deck during tear-off, and why we cover roof decking replacement separately. It also does not replace ventilation or good flashing, and it does not extend the life of shingles that are already past their prime. If you are wondering where your roof stands, see how long a roof lasts in Minnesota.

Underlayment and Solar Panels

If you plan to add solar, the roof beneath the panels is the hardest part of the house to reach later. Panels sit on racking that attaches through the roof, and flashing and sealing around those attachments depend on what is beneath them. Doing the roof first, with the right underlayment, means the layer under your array is fresh for the long haul. We cover the sequencing question in replacing a roof when you have solar panels.

Questions to Ask Your Roofer

  1. Which underlayment product is specified, and is it listed by name in the proposal?
  2. How far up from the eave will the ice barrier run?
  3. Which valleys and penetrations get membrane?
  4. What happens if the crew finds damaged decking?
  5. Is the underlayment part of the manufacturer’s roofing system, and how does that affect the manufacturer’s warranty?

You can also look up any Minnesota contractor’s license through the Minnesota Department of Labor and Industry before signing anything. For general background on how shingle systems are built, the Asphalt Roofing Manufacturers Association publishes homeowner resources.

Frequently Asked Questions

What is roof underlayment?

It is a protective layer installed over the roof deck and under the shingles. It acts as a backup barrier against wind-driven rain, melt water, and moisture while also protecting the deck during installation.

Is ice and water shield required in Minnesota?

Building codes in cold climates generally call for ice barrier protection at the eaves, and local requirements can vary. Your contractor should tell you how far up the roof it will extend and put that in the proposal.

Is synthetic underlayment better than felt?

Synthetic products are generally stronger and handle exposure during installation better, which is why many crews prefer them. The right choice depends on the product, the roof, and the shingle system being installed.

Can I skip underlayment to save money?

No. Skipping it removes your backup layer and can cause problems with code compliance and the manufacturer’s warranty. Ask your roofer to explain any line item that seems to cut it.

Does underlayment last as long as the shingles?

It is designed to work with the roof system, but it is hidden and you cannot inspect it later. That is why the choice made at tear-off matters. A roofer can tell you what is specified for your project.

Want to Know What Is Under Your Roof?

Centauri Systems offers free roof inspections and manages every roofing job from start to warranty, working with a subcontracted roofing partner. Request an exterior quote and ask us exactly what goes under your shingles.

Try these posts next:

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *